产品中心
P1.9indoor led screen

 

Case size: 400×300mm
Point spacing: 1.923mm
Brightness: 800cd/m2
IP level: 30
Power consumption: 350W
Module size: 200x300mm

 
1. Ultra-thin and light: single box 7.5KG, 100mm thick,
2. High contrast: mask design, black body SMD, non-reflective surface, large viewing angle, good display;
3 seamless splicing, easy maintenance: using lock Buckle structure makes the stitching operation simple and convenient without tools;
4. High contrast: mask design, black body SMD, surface is not reflective, large viewing angle, good display
  • 详细介绍
  • 技术参数
  • 解决方案

 

• product advantages:
1, ultra-thin: a single box 7.5KG, 100mm thick;
2, ultra-high refresh rate: to ensure that high-definition cameras and video cameras can capture HD high-detailed display screen;
3. Low-light and high-gray performance: Under the condition of low brightness, the display gray scale is uniform and the display consistency is good;
4, high contrast: mask design, black body SMD, the surface is not reflective, large viewing angle, good display;
5, high uniformity of brightness, color: the use of high-quality selection of the same batch of light-emitting devices to ensure higher uniformity;
6. Adopt advanced blanking scheme: completely eliminate dark and ghost phenomenon;


7, high reliability and long life: The use of in-line adapter plate design to simplify the connection within the box, effectively reduce the bad connection problems and reduce signal attenuation and interference, high-quality light-emitting devices to ensure high reliability and long life;
8, seamless rapid splicing, simple maintenance: the use of locking structure makes the splicing operation simple and convenient and without tools;
9, no noise: mute design, air conditioning, fan-free installation, eliminate noise, reduce power consumption, energy saving;
10, real-time error detection function: without additional external originals can be independently detected each LED is open, and can eliminate the resulting cross and other issues;
11. Optional front maintenance structure: easy to replace and maintain.

 

参数名称 Parameter name 参数 Parameter
像素结构      Pixel structure Table three LED
LED规格        LED Specification SMD1010
像素点组成      Pitch composing 1R1G1B
像素距离      Pixel distance 1.923mm
模组分辨率      Module resolution  (W×H) 104×156 dot
模组尺寸      Module size 200mm×300mm
像素密度      Pixel density 270421dot
峰值功耗      Peak power consumption 22W
模组重量      Module weight 0.336Kg
白平衡亮度      White balance brightness 800cd/m²
最佳可视距离     The best distance of visualization ≥ 1.9m
水平视角      Horizontal perspective 140°
垂直视角      Vertical perspective 140°
亮度均匀性      Luminance uniformity ≥95%
色度均匀性      Color uniformity ±0.004Cx,Cy
对比度         Contrast 5000:1
最大功率      Maximum power 675 W/m²
平均功率      Average power 200 W/m²
输入电压      Input voltage AC220V(50Hz)
输出电压      Output voltage DC 5V
驱动方式      Drive mode 1/30Scan 恒流驱动
换帧频率      Frame frequency 60Hz
刷新率         Refresh rate ≥1920 Hz
控制方式        Control way 同步
寿命典型值      Typical life values 100000 hrs
工作温度范围     Working temperature range -20一60℃
存储温度范围     Storage temperature range -20一60℃
工作湿度范围     Working humidity range  (RH) 10-80%
储存湿度范围     Storage humidity range   (RH) 10-85%
本站部分图文来源网络,如有侵权问题请通知我们处理!